Door System ADS 90 PL.SI

Schüco ADS 90 PL.SI, highly thermally insulated aluminium door system
With 90 mm basic depth.

Design features:
External flush-fitted door construction with continuous 5 mm shadow joint outside.
The thermal breaking split insulating bars are fitted with foam insulation for high thermal insulation.
The door leaf profiles are fitted with thermal breaking split insulating bars.
The door leaves must have a four-sided mitre-cut leaf profile and a continuous centre seal.
The system must be fitted with square glazing beads.
For increased thermal insulation, glazing gaskets with fins must be used.
If there are no other requirements specified for the sill by standards / guidelines / local building regulations, the bottom door sill must be fitted with an aluminium/plastic rebate threshold, height 20 mm, and a gasket system for sealing at a test pressure of up to 150 PA in accordance with DIN EN 12208.

Profile basic depths:
Outer frame, mullion, transom 90 mm
Leaf frame (door) with internal rebate 100 mm

Profile face widths:
Outer frame / sill, bottom 111 mm
Outer frame, side and top 84 mm
Mullion 104 mm
Transom 104 mm
Leaf frame
(Door, with internal rebate) 73 mm

download